Specific affinity and relative abundance of methanogens in acclimated anaerobic sludge treating low-strength wastewater.

Kinetic parameters affecting effluent water quality including half saturation constant (Ks), maximum specific growth rate (μmax), and specific affinity ([Formula: see text], defined as μmax/Ks) were investigated using three types of anaerobic sludge (raw anaerobic digestion sludge referred to as unacclimated sludge, unacclimated sludge after endogenous decay, and sludge acclimated to low-strength wastewater in an anaerobic membrane bioreactor (AnMBR) for 360 days). Long-term acclimation to low-strength wastewater resulted in sludge with high specific affinity (1.6 × 10-3 L/mg COD/day for acclimated sludge compared to 4.1 × 10-4 L/mg COD/day for unacclimated sludge). The μmax values for unacclimated sludge and acclimated sludge were 0.08 and 0.07 day-1, respectively. The Ks values for unacclimated sludge and acclimated sludge were 194 ± 81 mg COD/L and 45 ± 13 mg COD/L, respectively. Although the Ks of unacclimated sludge after endogenous decay increased to 772 ± 74 mg COD/L, μmax increased to 0.35 day-1 as well, resulting in no statistically significant difference of [Formula: see text] between the two types of unacclimated sludge. Overall, [Formula: see text] is a better indicator than μmax or Ks alone for determining effluent water quality, as effluent substrate concentration is approximately inversely proportional to the specific affinity. 16S rRNA sequencing data analysis indicated a high abundance (85.8% of total archaea) of Methanosaeta in the microbial community after long-term acclimation. High [Formula: see text] associated with the enrichment of Methanosaeta appears to ensure successful anaerobic treatment of low-strength wastewater.